PURPOSE
STS-112 security sensor with sensing element set is designed for detecting intruder trying to damage or traverse a mesh metal or concrete fence and causing mechanical impact on it.
FIELDS OF APPLICATION
- as a stand-alone intrusion protection system
- as part of integrated facility security systems in combination with detection equipment of other operating principles
VERSION
- sensor is a processing unit with connected cable sensing elements and STS-930 unit
- sensor processing unit is enclosed in a metal casing for protection against atmospheric impact and mechanical damage
- each of cable sensing elements is a special cable with a resistor contained end coupling
- STS-930 unit is in a metal casing, equipped with a solar module, battery, a radio modem and a controller
FEATURES
- detection of ultra-small mechanical fence vibrations caused by the intruder's physical impact
- protection against tunnelling when laying the cable sensing element into the ground
- generating and sending an alarm notification upon fence crossing or breaking attempts
- alarm notification transmission to the data acquisition and processing system via radio channel
- automatic regular operability check of the processing unit and sensitive elements
- generating a fault notification upon breakage or short-circuit detection
- adjusting the sensor with STS-4922 configuration cable STVF.426471.187 (purchased separately) or via RS-485 interface via RS-485-USB adaptor
PECULIARITIES
- power supply and radio communication of the sensor processing unit provided by STS-930 unit
- sensor is equipped with high-frequency and low-frequency sensing elements for vibration detection and for indication of partial fence damage
- adaptive algorithm of signal processing, significantly reducing the number of false alarms, including those resulting from changes in environmental conditions
- method of sensing elements installation is selected depending on the fence type and the line crossing approach that should be prevented
SCOPE OF SUPPLY
Name |
Quantity |
STS-112 Security sensor with SE set, including: |
|
- security sensor processing unit |
1 pc. |
- STS-930 unit STVF.425664.012 |
1 pc. |
- connection cable STVF.425628.032 |
1 pc. |
- cable sensing element set for STS-111, STS-112 sensors |
1 set |
Mounting set STAE.425911.002, including |
1 set |
- PY04-19TK Socket |
1 pc. |
- Heat shrinkable tube TUT 2/1 |
0,3 m |
- Insulated ring tip NKI 2-4 |
2 pcs. |
Spare parts-O set STVF.425973.157 |
1 set |
Passport |
1 copy. |
Packaging STVF.305639.004 |
1 pc. |
Operating guidelines* |
– |
* The operating guidelines are supplied in a single copy when shipped with a batch of products or as part of a system. For single deliveries, the operating guidelines are supplied for each unit Operating guidelines are available at: http://stilsoft.ru |
RELIABILITY AND WARRANTY
- Warranty operation period - 2 years
- Average operation period before decommissioning - 8 years (minimum)
Parameter name |
Quantity |
Length of secured section, m |
2 flanks 250 m each |
Detection probability |
0,95 |
Alarm message: - transmission frequency, MHz - radiated power, mW (maximum) |
433,5 10 |
Ensured line-of-sight alarm transmission range, m (minimum) |
1000 |
Number of sensors in the operating area of alarm receiver (maximum) |
63 |
Standby time after power-up, s |
60 |
Alarm recovery time, s |
10 |
Notification duration, s |
from 1 to 60 |
DC power supply voltage, V |
12 ± 10% |
Battery capacity, Ah |
7 |
Current consumption, mA (maximum) |
45 |
Operating mode |
continuous |
information value |
15 |
Operating temperature range, °С |
from -40 to +50 |
Overall dimensions, mm (maximum): - security sensor processing unit - STS-930 unit with bracket and antenna |
210х118х76 351х336х333 |
Weight, kg (maximum): - security sensor processing unit - STS-930 unit without bracket |
2 6,4 |
Number of beams in SEC set, pcs. |
4 250m each |